Nvidia doesn't license it's SLI "tech" (ability to use SLI) for use on Intel chipsets in order to make their own chipsets more attractive when Intel chipsets are generally superior and more stable. It's a way to manipulate the market to gain marketshare without directly competing with Intel.
Er... X38 supports crossfire, but not SLI.While I'm not certain of the single and dual performance differences between the upcoming Radeon HD 4870 cards, I highly suspect they will give Nvidia a run for its money... finally.
Personally, I'll likely be adding a Radeon HD 4870x2 into an x38 mobo come this July. I was going to go P35, but I'd rather get a SLI capable mobo right away just because... and some x38 mobos aren't much more expensive (and should be even less so come July).
If, for some reason the Radeon HD's disappoint, it'll be 2x9600GTs.
its nvidias drivers not allowing sli on intel chipsets
i wonder if anyone has ever got an answer from nvidia as to why this is so ?
Albuquerque, you're right on all but the overclocking. NV chipsets allow for higher FSB/DRAM speeds in my experience. Not to say that Intel chipsets are shoddy, 500/1000 on my P35
My 100% unmodified GA-X38-DS4 did 575FSB on entirely stock voltages on an E6850 at 6x multiplier. So I think my X38 > just about every 6xx and 7xx chipset I've ever heard of. And it was cheaper than every 780 motherboard I've found too...
Nvidia doesn't license it's SLI "tech" (ability to use SLI) for use on Intel chipsets in order to make their own chipsets more attractive when Intel chipsets are generally superior and more stable. It's a way to manipulate the market to gain marketshare without directly competing with Intel.
Because why else would you buy an NVIDIA chipset except for maybe IGP performance? The only big reason left to buy an NV chipset is to get SLi running. Intel's offerings beats NV's on price, power consumption, overclocking, stability, and driver set last I checked.
More importantly why can't I have Crossfire on my 680i!?!
I believe that unlike SLI, Crossfire still requires a small bit of hardware help on the MB to be fully implemented.
as stated previously I'm fairly certain both CF and SLI are just relying on bog standard peer-to-peer PCI.