GeForce5 6000 Revealed

[Gollum]

Seems to be a trend these days, so there ya go, somebody spilled the beans again! It seems impossible to keep things secret these days - and now we know what's coming next from Nvidia:

Oh this is so convincing looking its gotta be true, here's what Kyle has to say:
"GeForce5 6000 Revealed:
Apparently NVIDIA is not one to be left behind…we have proof from a reliable source ( he only sent this picture to me…and 1000 other of his closest webmaster friends ) This picture is total undeniable proof that NVIDIA used the 3dfx technology to unleash the GeForce5 6000!!! I have further proof from my friend, who is close to NVIDIA, that the GF5-6000 is getting an astonishing 54014 3DMarks!!! I cannot reveal the persons true identity out of fear of retaliation from former 3dfx employees…so he sent me this from his Yahoo account under the name “Emilioâ€￾. Remember you saw it here first…."
Hmm, somebody seems to be a bit grumpy these days eh?

Well, what's next? Can somebody come up with a halfway convincing looking "Parhelia 1024" with support for 6 monitor surround gaming, I wonder?

 

[up]

 

[Bambers]

AWE 32 size cards make a comeback

 

[Dave Baumann]

I cannot reveal the persons true identity out of fear of retaliation from former 3dfx employees…so he sent me this from his Yahoo account under the name “Emilio”. Remember you saw it here first…."

So, Yahoo accounts are somehow more reliable than Hotmail?

 

[Teasy]

Yeah this has just got to be real:

CPU - Intel Pentium 6 4859mhz

LOL!!

 

[phynicle]

hahhaha i noticed that as well

 

[MuFu]

I love the way the PCB is slightly BENT in the middle and how it has the part number written in two places on the top edge; just in case your field of vision is comparable to that of an ant, lol.

MuFu.

 

[BoardBonobo]

It also appears to 8 ram chips on the front, and I guess it would have 8 on the back giving you 256Mb memory. Maybe the bends there to increase the air flow around the card whilst it's sticking out of the hole you had to make in the front of your case to fit it in Nice that they can run it with the 28.32 dets as well.

Besides I'd be more interested in the P6 right now!

ROFL

 

[Nappe1]

I just can't wait to se someone dig up Pyramid3D with it's ultimate setup: 11 chips in paraller.


this was good one.

 

[king_iron_fist]

Methinks this leak is a piece of satire (or ****taking ) out of the huge amount of 'leaks' going round recently.

 

[Jazz]

lol

 

[mat]

Looks somehow like the 4Chip TNT2 Board that was once on www.nvidiot.com (site is down now)

 

[Dave B(TotalVR)]

Oh come on that is sooo fake.

Intel pentium 6?

dont make me laugh.

 

[Glonk]

They should have also fudged the driver version, since we know 28.xx wouldn't support next-gen hardware.

 

[Brent]

if you can't figure out this is fake then may be missing a few marbles in your noggin

its just one more log to throw into the 'fake' fire of video cards floating around...

i guess people are either getting anxious or bored to make these lol

 

[jvd]

shouldn't the 6000 be a 4 chip board where as the 5000 would be a 2 chip board ?

 

[Basic]

Duuhh!

There's of course two more GPUs on the other side.

 

[Bambers]

They missed out the power connector. 2 gf4s would be over the agp spec, 4 would probably need their own PSU .

 

[Geeforcer]

They missed out the power connector. 2 gf4s would be over the agp spec, 4 would probably need their own PSU .

Whatever you think might be missing is on the other side

 

[Althornin]

Whatever you think might be missing is on the other side

lol!
The new nVolt exterior power supply!