11nm

overclocked · Jun 19, 2003

Is this the NV40 will be build on as a middlestep to 09nm???

I also was thinking that if Low-k will be matured on 130nm how would the trans budget seemlike and coreclockspeed??

Arun · Jun 19, 2003

I don't even think IBM offers 0.11Âµ...
And IBM is no where near having Low-K I believe.

From my understanding, the NV40 is 0.13u, *maybe* with SOI.

Uttar

T2k · Jun 19, 2003

Just for the records: 0.11Âµ = 110nm, not 11nm

overclocked · Jun 20, 2003

But NV30 was "meant" to be build with low-k, couldÂ´t a respin of NV35 use it if is enough matured or would it require a lot more effort than it will be worth.

High 5-HIAA · Jun 20, 2003

From my understanding, the NV40 is 0.13u, *maybe* with SOI.

Are you sure?
I was under the impression it was .13u bulk Si...
of course, your sources are likely to be more accurate than mine

Arun · Jun 20, 2003

High 5-HIAA said:
From my understanding, the NV40 is 0.13u, *maybe* with SOI.

Click to expand...

Are you sure?
I was under the impression it was .13u bulk Si...
of course, your sources are likely to be more accurate than mine

Well, I gotta admit I got *ZERO* idea about whether it'll use SOI or not.

However, considering some info I've got and which shall be released in the very near future, if it didn't use SOI, we're off to another dustbuster I fear

Uttar

overclocked · Jun 20, 2003

Uttar, is it clear that NV40 are going to be manufactured at IBM.
And again i must ask that a respin to counter a ATI card of the NV35 is likely and/or they are opting for low-k.
Another thing related to this is that someone here at the forum said there where a couple different 130nm designs/some more advanced so it would be nice if someone could repost them.

Josiah · Jun 20, 2003

heh, when will we see 11nm in production...10 years?

PC-Engine · Jun 20, 2003

Josiah said:
heh, when will we see 11nm in production...10 years?

http://www.necel.com/en/process/ux6.html

Unit01 · Jun 20, 2003

Micron is starting to produce GDDR3 on 11nm tech they said some time ago

Basic · Jun 20, 2003

PC-Engine and Unit01:

As previously written.

T2k said:
Just for the records: 0.11Âµ = 110nm, not 11nm

micron · Jun 20, 2003

Unit01 said:
Micron is starting to produce GDDR3 on 11nm tech they said some time ago

Where did you hear that? Are you sure you can trust them? http://www.beyond3d.com/forum/viewtopic.php?p=131055&highlight=#131055

11nm

overclocked

Arun

Unknown.

T2k

overclocked

High 5-HIAA

Arun

Unknown.

overclocked

Josiah

PC-Engine

Unit01

Basic

micron

Diamond Viper 550

Similar threads