nForce4 (AMD) integrated GBit LAN problems

[Kaotik]

First of all, I'm running Vista build 5728 (the latest build), the drivers SHOULD be quite good already, apparently.

Anyway, to the point - I've got annoying problem lately, if I get huuuuge amounts of traffic at once (logging in Ironforge at "busy hours" for example) from WoW, I got disconnected and the whole internet connection dies 'till I reboot.

Should I enable/disable/change settings on these:
Flow Control: Disable
Interrupt Moderation: Enabled
IP Checksum Offload: Disabled
Jumbo Packet: 1514
Large Send Offload version 1 (IPv4): Disabled
Large Send Offload version 2 (IPv4): Disabled
Large Send Offload version 2 (IPv6): Disabled
Network Address: Not Present
Priority & VLAN: Prority Enabled
Speed & Duplex settings: Auto Negotiation
TCP Checksum Offload (IPv4): Disabled
TCP Checksum Offload (IPv6): Disabled
UDP Checksum Offload (IPv4): Disabled
UDP Checksum Offload (IPv6): Disabled

 

[Bludd]

Why are all the checksum offloading options disabled?

I checked my integrated Intel PRO1000CT driver settings and flow control is on, all the checksum offloaders are on too.

Also, why do you use Jumbo Frames? Are you using Gigabit Ethernet?

 

[Guden Oden]

Jumbo frames is bad across the internet, from what I hear. Maybe turn off.

 

[Kaotik]

Those are the default settings on Vista, I have no idea of 'em

Thanks for the tips, I'll try 'em out. So enable on flow control & checksum offloads