Performance Heatsink+Fan Review

rainz

Veteran
Hi,

I saw couple of months ago .. i dont remember which site .. a huge review of almost all the good heatsink/fan for the OCers. I need a new one and the only thing i remember was something like the SP94 .. ah and btw i need something for the Athlon 64 ! if someone has any advices.

Thx

RainZ

EDIT: Thermalright SP-94 is only for the 478 socket :(
 
Joe DeFuria said:
I recommend you take a look at this:

http://www.zalman.co.kr/usa/product/view.asp?idx=54&code=005009

With the fan at full speed (12 V), one of the better air-coolers you'll find, with a "decent" noise level. At low speed (5V), one of the quietest for the amount of cooling you get.

http://www.zalman.co.kr/usa/product/view.asp?idx=79&code=005009

Just ordered this one this morning Joe .. i'll receive it prolly tomorrow ! 9$ more but .. Full Copper !

RainZ
 
rainz said:
Joe DeFuria said:
I recommend you take a look at this:

http://www.zalman.co.kr/usa/product/view.asp?idx=54&code=005009

With the fan at full speed (12 V), one of the better air-coolers you'll find, with a "decent" noise level. At low speed (5V), one of the quietest for the amount of cooling you get.

http://www.zalman.co.kr/usa/product/view.asp?idx=79&code=005009

Just ordered this one this morning Joe .. i'll receive it prolly tomorrow ! 9$ more but .. Full Copper !

RainZ

Heh...I would've actually recommended that AlCu (aluminum / copper hybrid.) Most tests show it cools almost exactly the same....it's much lighter (less to worry about when moving your system), and it's cheaper.

But hey, it's a great cooler nonetheless. ;)
 
Joe DeFuria said:
rainz said:
Joe DeFuria said:
I recommend you take a look at this:

http://www.zalman.co.kr/usa/product/view.asp?idx=54&code=005009

With the fan at full speed (12 V), one of the better air-coolers you'll find, with a "decent" noise level. At low speed (5V), one of the quietest for the amount of cooling you get.

http://www.zalman.co.kr/usa/product/view.asp?idx=79&code=005009

Just ordered this one this morning Joe .. i'll receive it prolly tomorrow ! 9$ more but .. Full Copper !

RainZ

Heh...I would've actually recommended that AlCu (aluminum / copper hybrid.) Most tests show it cools almost exactly the same....it's much lighter (less to worry about when moving your system), and it's cheaper.

But hey, it's a great cooler nonetheless. ;)

Bah .. i dont care about the weight my computer is already like 50 pounds ? :LOL: and my Zalman copper looks better than the hybrid one . Ya i know ... 9$ ... bah it's the life ! :devilish:

And thx again for the Zalman info Joe !

RainZ
 
You can get this one Dig

[INTEL Processor]

Celeron [All Speeds]
Pentium 4 [All Speeds]

Silent Mode 1350RPM All Speeds
Normal Mode 2400RPM All Speeds

[AMD Processor]

Duron [All Speeds]
Athlon XP [All Speeds]
Athlon 64 [All Speeds]
Opteron [All Speeds]

Silent Mode 1350RPM All Speeds
Normal Mode 2400RPM All Speeds

CNPS7000A-Cu = http://www.zalman.co.kr/usa/product/view.asp?idx=54&code=005009 ( aluminium + copper hybrid )

CNPS7000A-AlCu = http://www.zalman.co.kr/usa/product/view.asp?idx=79&code=005009 ( full copper )

Like Joe said .. it's Light ! Cheaper than the one i ordered and a real good performer !

You can see it in action !
http://www.tomshardware.de/site/videos/thg_videos.html ( download the video #10 )

RainZ
 
digitalwanderer said:
{Sniping}Waste said:
Digi did you try the HSF I sent you yet?
SPIT! :oops:

I totally spaced it since I've changed my mobo, I'll toss it on later and see if'n it helps any. :)

:oops: Look 2 msgs up Digi updated it while you posted this one.

RainZ
 
Finally Joe they received the Zalman CNPS7000A-Cu ( Full Copper ) even if i canceled the order and i decided to bought this one too ! So i decided to install the new one ( Copper ) on my 64 3200+ and install the hybrid on my XP 2600+

But.... my motherboard on the XP 2600+ didnt have the 4 holes to install the 2 supports .. damn Gigabytes .. No idea why ... Well i'll return the Hybrid .. bah !

RainZ
 
Back
Top