Multipliers above 12.5?

Discussion in 'PC Hardware, Software and Displays' started by zsouthboy, May 14, 2004.

  1. zsouthboy

    Regular

    Joined:
    Aug 1, 2003
    Messages:
    563
    Likes Received:
    9
    Location:
    Derry, NH
    ASUS a7n8x-e deluxe.

    Yes, this board only does the 3-bit ID for the multi.

    I'm maxed out as far as my memory will go (its cheap, it doesn't get very far over 200, even with volts boost).. and i'm at 12.5 multiplier.

    I know this proc will do more (currently prime95 stable for 16 hours and counting at 2500 mhz 12.5 x 200)..

    I tried doing the wire-mod here http://www.themodfathers.jolt.co.uk/?page=&action=show&id=6144 but it doesn't enable multi's above 12.5, only below(which I already have)..

    Help?
     
  2. Nick Spolec

    Newcomer

    Joined:
    Apr 7, 2004
    Messages:
    199
    Likes Received:
    0
Loading...

Share This Page

  • About Us

    Beyond3D has been around for over a decade and prides itself on being the best place on the web for in-depth, technically-driven discussion and analysis of 3D graphics hardware. If you love pixels and transistors, you've come to the right place!

    Beyond3D is proudly published by GPU Tools Ltd.
Loading...