DLink Di-604.Just curious... what routers are you guys using?
As shipped, the Linksys firmware on pre-v5 routers crashes under heavy peer-to-peer network traffic, such as BitTorrent, eMule or other P2P software. The reason for this crash is that Linux's connection tracking by default keeps track of old connections for five days. This five day limit quickly overwhelms the router's internal memory when there are a high number of network connections, and can only be resolved by power cycling the router. For a detailed tutorial on how to permanently fix this issue, see the uTorrent FAQ. Briefly, it involves installing a 3rd party firmware that alows setting the timeout to lower levels, which drops inactive connections and prevents the crashes.
Dealing with Usenet is a different kettle of fish. Storage requirements can be massive, usually involving databases. Filtering and data manipulation tools need to be an order of magnitude more complex. Automation is usually a lot more necessary too. There's just a whole lot more functionality required to deal with all the data sensibly.
I don't think you're ever going to get something as small and focussed as uTorrent for dealing with Usenet.
You can put the Linux based Micro DD-WRT firmware on it. Although I've never had stability issues with the VxWorks stock firmware. DD-WRT is better with QoS though if you use that.I use have the wrt54g v5 which use vxworks, not linux as the OS.
http://en.wikipedia.org/wiki/WRT54G
You can put the Linux based Micro DD-WRT firmware on it. Although I've never had stability issues with the VxWorks stock firmware. DD-WRT is better with QoS though if you use that.
This is not correct. The Micro DD-WRT firmware loads via GUI & is fully accessible via the GUI. Some of the additional packages were left out to fit within the 2MB flash. I flashed a colleagues WRT54G v5 a few months back in order to tweak signal output for parabolic reflectors. I achieved >9dB gain @50mW output relative to the standard firmware for the target zone.IIRC, you lose the GUI if you install micro, and have to configure everything via the command line.
Just curious... what routers are you guys using?
Thanks for the info. The router is stable with the latest VxWorks firmware. Maybe I will try LInux in the future just to see how it works.You can put the Linux based Micro DD-WRT firmware on it. Although I've never had stability issues with the VxWorks stock firmware. DD-WRT is better with QoS though if you use that.