Recent content by Optimummind

  1. O

    2.8E can't reach 3.5ghz. PC4000 RAM the way to go?

    This is what I suspect too. I have a different question then. If I buy 2x512mb PC4000 RAM and run it in a 1:1 ratio with the CPU, my theoretical memory b/w will have increased from my current 3.11GB/s (6.22GB/s, dual-channel) to 3.88GB/s (7.76GB/s, dual-channel). Will this increased B/W...
  2. O

    2.8E can't reach 3.5ghz. PC4000 RAM the way to go?

    Do you mean I should set the CPU:RAM ratio to 1:1 and overclock my FSB incrementally to see how far my memory can handle? At 2.8E, my 2x512MB PC3200 sticks are running at 1:1 at 200mhz and they are fine. I haven't tried taking it beyond 200mhz. After doing this, if my memory fails...
  3. O

    2.8E can't reach 3.5ghz. PC4000 RAM the way to go?

    My Prescott 2.8E is currently overclocked to 3.4ghz with a FSB of 243. The CPU voltage on the Abit IS7 is 1.6625 V. The DDR voltage is 2.6V on my 2x512mb PC3200 setup. (1x512mb is a no-name Legacy brand and the other 1x512mb is a Mushkin value brand). Through the BIOS, the 2x512mb DDR400...
  4. O

    Have we forgiven Nvidia?

    Quoted for truth.
  5. O

    New instancing demo

    1: 398 2: 405 3: 430 4: 171 5: 92
  6. O

    6800GT review by some 'Hanners' guy...

    The review test rig should've been better matched to the 6800GT being used. The CPU is really slow and a bottleneck for the GT. Next time, a faster rig and with a better mobo and RAM should be used--see Anandtech's review systems for reference.
  7. O

    Anandtech: 3DMark worst benchmark ever seen

    What an embarrassed dolt! You showed him, Evil!! This guy is hilarious to the point of being ridiculous.
  8. O

    Generic RAM

    Using generic RAM can often save you lots of money while keeping the performance level very similar to pricier brand-name RAM. However, they do have a lower ceiling in terms of overclockability, reliability, and compatibility. If you got lucky and got generic RAM modules that satisfy your...
  9. O

    Profit of NV40 parts

    You didn't, by any chance, come from the Driverheaven or Rage3D did you? :lol:
  10. O

    Profit of NV40 parts

    What a dum-dum. :D
  11. O

    Tony Tamasi Interview

    Exactly. Before the Catalyst series, ATI drivers were harshly criticized b/c their official release and shipping drivers were very flawed. In this case, you can't criticize the 60.72 drivers b/c they're BETA and not official ones.
  12. O

    How to record VCR to DVD??????

    Hi, I've never used any PVR (personal video recording) hardware and software before. I want to try it now because there is an awesome drama I have on VHS tape that I want to transfer to DVDs. So, I went searching and decided that a HAUPPAUGE WINTV PVR 250 TV TUNER PCI CARD would do the...
Back
Top