PDA

View Full Version : Mali 200 silicon demo

Grumpy
02-Feb-2008, 05:29
A bit late, but I didn't find any references to this in the forum: http://youtube.com/watch?v=UWCVZiYr1Sw
Lazy8s
02-Feb-2008, 06:28
Impressive lighting and sharp textures.

Is that a laptop/notebook level configuration, considering it's at 300 MHz?
Farid
04-Feb-2008, 14:23
UWCVZiYr1Sw
3dcgi
05-Feb-2008, 05:15
Congrats to the engineers. Having demos running 2 weeks after receiving silicon is a nice achievement.
Arun
05-Feb-2008, 09:02
Is that a laptop/notebook level configuration, considering it's at 300 MHz?That depends completely on the process. IF it's 65nm, which I would expect it to be, then that's perfectly reasonable for a handheld part. Certainly it's in the upper range, but believable and okay from a perf/watt POV.
roninja
07-Feb-2008, 23:11
Mali200 seems to have got some support in NXP and EMP.
Lazy8s
21-Feb-2008, 03:12
An ARM representative characterized Mali200's power consumption at about 0.9mW/1MHz, so a 300 MHz GPU in a mobile phone might be acceptable with a very good battery.
roninja
21-Feb-2008, 20:42
How does that compare to SGX?